Chaoshen Technology Trading Mall

In a few minutes, Wang Bin came to a small factory area on the hillside of this hill. Much bigger.

But Wang Bin cared very much about this factory area. Not only was there a wall nearly four meters high around the factory area, but the security inside the factory area was also very tight.

And looking at the expressions and walking postures of these security guards, people with certain military knowledge will definitely find that these people are not ordinary security guards, they are definitely veterans, and they are not ordinary veterans.

At the same time, for the sake of the factory area, Wang Bin also directly bought the entire small hill where he was located.

After arriving at the gate of the factory, Wang Bin verified his identity before entering the factory and inside the factory.

"Professor Pok, what kinds of high-temperature blades I sent over before, how about the high-temperature blades made of different materials, can they all be used as materials for high-temperature blades?" When he came to a workshop in the factory area, Wang Bin found the blades that were busy. The poking professor asked,

That's right, in this unremarkable factory area is Wang Bin's important experimental base of Tiangong Technology, the Hangfa Research and Development Base, and Professor Po is the person in charge of this base. Of course, the laboratory is still very simple at this time. , a lot of aeroengine testing equipment is not in place, but even so, Professor Zha and the others have achieved considerable results during this period of time.

The first is to complete the shaping and manufacturing of the engine shell material, and at the same time determine the material determination and shaping of the high-pressure combustion chamber of the engine, and even make some improvements to some parts of the engine based on his own knowledge and experience in aviation research and development. This makes the engine theoretically able to burst out with stronger thrust.

At the same time, they have also determined the blade material of the front half of the engine during this period, that is, the blade and material of the compressor part.

And now they are testing and finalizing the turbine blade material behind the combustion chamber.

At the same time, it is also the last step in this regard. As long as the turbine blade material is determined, the material of the aeroengine engine he obtained before is basically the same. The next step is to manufacture the real prototype and test related aspects.

"It's not bad. Among the materials you sent before, two materials meet the requirements for turbine blade materials. These two materials are special high-temperature resistant glass materials and high-temperature and high-pressure resistant special steel materials.

Among them, the high temperature resistant glass has a maximum temperature resistance of about 2300 degrees, and its weight is relatively light, which is a very good choice of blade material.

However, this kind of glass also has its own defects, that is, the performance of anti-centrifugal force under high temperature and high pressure is somewhat insufficient. Although it can already be used as the material of blades, I do not recommend it, but it is still good as a choice of compressor blades.

As for the turbine blades, we have a better choice, which is the special high-temperature-resistant red steel material that you sent over, Mr. Wang, which is the special high-temperature-resistant steel material named Red Steel Type 1 by our Tiangong Technology.

This kind of steel not only has the highest high temperature resistance of about 2600 degrees, but also exceeds the special high temperature resistant glass we mentioned before in terms of overload resistance and other performances under high temperature and pressure.

At the same time, in terms of weight, although it is heavier than the previous special high-temperature-resistant glass, if this material is used, the temperature of the combustion chamber can be higher, and the pressure and temperature that the turbine blades can withstand are also higher. Naturally stronger than before.

So if this material is used as the blade material,

I think the thrust of the engine may be further improved.

It can be said to be a rare aviation turbine blade material. Hearing Wang Bin's inquiry, Professor Cui replied.

"That's fine! We decided to use this type of red steel as the material for the turbine blades of our aircraft.

Does that mean that we can finally start the real trial production of aviation development? If it can start, I will go to inform our precision workshop to start the manufacture of aviation components! "Wang Bin asked again after getting Professor Chi's answer.

After all, their Tiangong Technology is not an official company. After selecting materials, they must go through a series of things before they can start real manufacturing. Wang Bin's Tiangong Technology does not need to be so troublesome, as long as Wang Bin, as the boss of Tiangong Technology, agrees , then it can be manufactured immediately.

After listening to Wang Bin's words, Professor Zha thought for a while and said: "Although the testing equipment here is not very complete, many important aviation testing equipments are not available yet, but if it is just a simple test, our The side is still okay!" First release www.(x81zw) m./x81zw/

Afterwards, Wang Bin talked to Professor Po, and returned to the Tiangong Technology headquarters, and took out the drawings of the components of the aviation engine, and asked the masters in the precision workshop to start processing these components.

.........

However, when Wang Bin and his Tiangong Science and Technology laboratory were busy processing the parts of the aviation engine, this morning, Chief Engineer Lin and Manager Cao, who were far away in the provincial capital, also set off from their 969 Group, Come towards them Tiangong Technology!

After several hours of driving, Chief Engineer Lin and Manager Cao finally arrived at Wang Bin's Tiangong Technology around ten o'clock in the morning.

At this time, Wang Bin had already received a call from Mr. Lin and the others, so when they came to Tiangong Technology, Wang Bin, Wang Xu and others were already waiting for their arrival.

"Boss Lin! Manager Cao welcomes you to visit Tiangong Technology again!" After Manager Cao and Chief Engineer Lin got out of the car, Wang Bin came forward and said to Chief Engineer Lin and the others with a smile.

"Hello! Mr. Wang! We meet again!" Mr. Lin and Mr. Cao said to Wang Bin, and shook hands with Wang Bin, and then Wang Bin led them to his office.

After the two sides had been shabby for a while, Wang Bin asked Mr. Lin and the others: "Mr. Lin and Manager Cao don't know what is the purpose of your visit to Tiangong Technology?"

Before, although Wang Bin knew that Chief Engineer Lin and Manager Cao would come to Tiangong Technology, but Wang Bin did not know the purpose of Chief Engineer Lin, Manager Cao and others coming to Tiangong Technology. The new 81 Chinese website is the fastest updated computer terminal: www.@x81zw@@

After all, if it is to place an order, with the current technology, there is no such trouble. It only needs to make a phone call, and then send someone to Tiangong Technology to sign the contract. There is no need for Manager Cao and the others to come in person, let alone two people Come.

After listening to Wang Bin's words, Mr. Lin no longer concealed anything, but said directly: "Mr. Wang! To be honest, I came to Tiangong Technology this time to confirm one thing with you, that is, Is the Industrial Special Materials Company a branch of your Tiangong Technology?"

Wang Bin is not surprised that Manager Cao and Chief Engineer Lin knew about this matter. Although Wang Bin has kept the acquisition of Tiangong Special Materials Company extremely confidential, even if the entire Tiangong Technology knows about this matter, Not many.

But as Chief Engineer Lin and Manager Cao, if you want to inquire about this matter, you can still find it!

So Wang Bin did not deny it, but nodded readily, and said to Manager Cao and Chief Engineer Lin: "Indeed! Tiangong Special Materials Manufacturing Company is a branch of our Tiangong Technology. To be precise, It is a civil special material manufacturing company!"

"That's the case with Yuan Guang!" Mr. Lin asked again.

"Yes, Tianyuan Optics is also a branch of Tiangong Science and Technology. How come Mr. Lin and Manager Cao, do you have anything to tell me about these two branches?" Wang Bin asked them after thinking about it. .

After all, if there is nothing to do, they will definitely not mention these two companies, especially since these two companies are only companies that produce special materials and glass for civilian use.

"It's really Mr. Wang, your branch of Tiangong Technology! This is really something to be happy about! Although the performance of the special steel you developed before is very advanced, it even surpasses the best in the world in this era. properties of bearing steel.

But according to my analysis, the most important reason why the bearing steel you produced before has such good performance is that a large amount of rare metals are used in this bearing steel, and even strategic grade presence of metallic elements.

Therefore, although this bearing steel is very good, its material is already doomed. This kind of bearing steel can only be used in a small range, and it cannot be sold on a large scale. Otherwise, even if our country is a rare earth country , can not afford such rare earth consumption.

So with this bearing, although it allows us to break through foreign bearing manufacturers in many fields of military equipment, and impose restrictions on our country's military bearings, it is nothing more than that.

But now your Tiangong Special Materials Company is different. Although the special bearing steel used by your company is based on our previous bearing steel, at the same time, its performance is far from what it used to be. compared to that of .

However, the use of rare earths has been greatly reduced, and even the strategic-grade materials that were originally used have been completely discontinued.

This makes the large-scale mass production of this bearing steel no longer a dream, so Mr. Wang bought the current Tiangong Special Materials Manufacturing Company to produce this bearing steel.

At the same time, regarding the situation of the domestic bearing steel market, I think you, Mr. Wang, must know that many things are even initiated by you, Mr. Wang. I don’t know if what I said, Mr. Wang, is right! "Mr. Lin said.

"Yes, Mr. Lin, what you said is basically correct. After all, the domestic bearing steel and bearing market cannot always be dominated by these foreign bearing manufacturers.

Although we can't and can't completely drive these foreign giants out of China, the right to speak in this market must be in our own hands, Mr. Lin, don't you think so!

The situation in the bearing and bearing steel market during this period was caused by competing for domestic market share or the right to speak. "Wang Bin nodded and said.