Chaoshen Technology Trading Mall

When the domestic bearing market was in a turbulent state, Wang Bin still came to the factory every day to take a tour, and then went to his own laboratory to continue research and development of superconducting batteries.

Although Wang Bin has made some breakthroughs in the second-generation superconducting battery technology during this period of time, the difficulty of the second-generation superconducting battery technology is not comparable to that of the first generation.

Therefore, it has been more than half a month since the official start of work after the year, and Wang Bin still has not successfully manufactured the second-generation superconducting battery in the laboratory, and there are still many problems that have not been solved.

However, the experimental progress of manufacturing the second-generation superconducting battery is not very satisfactory to Wang Bin, but he is not in a hurry, after all, the difficulty of the second-generation technology lies there.

What's more, even the production line of copper-based room-temperature superconducting materials is still under development, and there is no shadow of the first-generation superconducting battery production line.

Even if the second-generation superconducting battery technology is successfully developed, it can only be put in the hands now. After all, the copper-based superconducting battery technology, as the name implies, is based on the copper-based room temperature superconducting material he developed before, so there is no copper-based superconducting battery technology. Based on the normal temperature superconducting material production line, it is impossible to produce superconducting batteries on a large scale.

Fortunately, according to the knowledge in his mind, the production line of superconducting batteries is actually not very difficult. At the same time, in terms of production lines, the first and second generations can be used in common, so as long as he builds the production line, he will naturally The first and second generation superconducting batteries can be produced.

But then Wang Bin thought that as their Tiangong technology involved more and more products, there would be more and more production lines and equipment.

He found that the factory area of ​​their Tiangong Technology headquarters is already somewhat saturated. If they want to build a superconducting material production line at the headquarters, as well as a superconducting battery production line in the future, it is obvious that the factory area at the headquarters is not enough. .

Thinking of this, Wang Bin walked out of his laboratory, came to the office, and immediately called Wang Xu, the person in charge of the factory at the headquarters.

"Wang Xu! Now the factory buildings in our new factory area are almost saturated, but our company is still expanding, and there will be more and more products. Wait, you can go to the management office of the new industrial area to ask, Have the medium and large factories in front of us in the industrial zone been rented out or sold? If not, then let’s buy the two rows in front, a total of ten factories!

In addition, there are those lands we bought in the industrial zone before, and it is time to start construction. When you are free, contact some design and construction companies," Wait until Wang Xu came to Wang Bin's office and sat down. Afterwards, Wang Bin said to him.

"Okay! Mr. Wang! Is there anything else? If not, I'll do it now!"

Although Wang Xu disagreed with what Wang Bin said, after all, in his view, the expansion speed of their Tiangong Technology has been fast enough during this period of time, and it can be said that it has reached its limit.

If it continues to expand at this rate as before, it is inevitable that the company will have some problems, so he believes that it is time for the company to slow down, settle down, and digest some of the negative effects of the previous expansion.

For this reason, he went to Jiang Zongliang specially before, and told him his opinion, and Jiang Zongliang also agreed with him very much.

They even tactfully proposed to Wang Bin a few days ago.

It's just that whether it's him or Jiang Zongliang, they are just executives of Tiangong Technology, not the boss of Tiangong Technology, so they can only provide Wang Bin with some reference opinions. The final decision still depends on Wang Bin himself. of.

And now it seems. Wang Bin is not ready to accept his and Jiang Zongliang's opinions, but is ready to continue expanding the company's scale!

In this regard, he and Jiang Zongliang have no good solution. After all, Tiangong Technology is a private company, so naturally no one can influence Wang Bin's decision. All they can do is to do their own work well and try to eliminate Negative influences within the company and its employees allow the company to grow smoothly. First release www.(x81zw) m./x81zw/

"Go!" Wang Bin nodded and said.

Seeing Wang Xu walk out of his office, Wang Bin still knew what they were thinking, and also knew that they were doing it for the good of the company.

After all, if it is an ordinary company, blind expansion is not a good thing for the company.

But their Tiangong Technology is not an ordinary company, not to mention that Wang Bin has the golden finger of the technology mall, which has already made their company invincible.

It’s just that everything Tiangong Technology currently has is based on high-end basic materials. As long as the formulas of these basic materials are in hand, even if the company collapses one day, as long as the formulas of these materials in his hands are not outdated, they will be able to use them all day. Engineering Technology can also stand up quickly, unlike other companies that, once they fall, cannot get back up again.

Thinking of this, Wang Bin stood up and walked towards the laboratory again. Of course, this time Wang Bin was not going to his own laboratory, but the mechanical research and development experimental workshop.

"Hello, Mr. Wang!" Just as Wang Bin entered the gate of the experimental workshop, Wang Bin was discovered by Yu Pingping, the head of the mechanical research and development team.

"Hello! Team Leader Yu, how is the research and development of the special copper alloy production line I handed over to you last time? Have you encountered any difficulties?" Wang Bin nodded and asked Pingping.

"Mr. Wang! In terms of research and development of the production line, we haven't encountered too many difficulties, and now the research and development of the production line has entered the final stage. I don't think it will take long for the production line to be successful.

However, since Mr. Wang last time you asked us to develop the production line as soon as possible, the production line we developed this time does not have a large production capacity, and the maximum daily production capacity is only less than 100 tons.

But please rest assured, Mr. Wang, as long as the production line we developed this time is successful, then we can use this research and development experience to develop a production line with greater production capacity. " Yu Pingping said.

"Well! What you have done is already very good. According to my original estimate, it will take at least one or two months for you to develop the production line. I didn't expect that you are almost the same in less than a month. Finished, this has greatly exceeded my expectations." 噺⒏⑴祌The full text of the text is the fastest んττρs:/м.χ八一zщ.còм/

At this point, Wang Bin paused for a while, and then said to Pingping: "Can you show me the blueprint of the production line you designed."

"Okay! Mr. Wang!" After speaking, Yu Pingping came to a computer in the laboratory and pulled out the drawing from the computer.

And Wang Bin also followed Yu Pingping to the side of this computer, and looked at the drawings in the computer.

He found that although the production line of copper-based room-temperature superconducting materials involved in Pingping and others is generally very good, there are no major problems.

But after all, this is the first time they have designed a complete production line, so in the design process, there will inevitably be various problems and defects.

So Wang Bin pointed out some deficiencies and defects for them while looking at the drawings, hoping that they could complete these places.

At the same time, Wang Bin also discovered that this production line is just like Yu Pingping said, it is just a small production line, and the theoretical maximum daily production capacity can reach 100 tons.

But this is just a theory, and the actual production capacity is simply impossible to reach this level, and it can only reach 80% of the theoretical value at most, which is already very remarkable.

So in fact, after this production line is completed, it will be very good if the daily production capacity of 24 hours of uninterrupted production can reach 80 tons.

Although the maximum daily production capacity can only reach this level, it is temporarily enough for Tiangong Technology.

So Wang Bin raised his head and said to Pingping and the others: "You have done a very good job, and I am still somewhat satisfied with this production line.

But there are still many areas for improvement, and the biggest area for improvement is in automation.

Have you noticed that the production line you have designed does not have any automation measures, and even if there are some, they are all purely mechanical.

So I hope you will give more consideration to automation and digitalization when designing production lines in the future.

However, as a small production line, I am quite satisfied on the whole. At the same time, I also hope that you can make persistent efforts to develop a production line with greater production capacity! "

"Okay! Mr. Wang! We will work hard!" Yu Pingping replied.

"Mr. Wang! In fact, when we were designing this production line, we were planning to design a fully automatic production line at the very beginning.

But I searched around our company, but I didn't find any talents involved in programming and automation, so we had to design this kind of non-NC production line as a last resort! Just after Yu Pingping finished speaking, Jia Jie next to him spoke to Wang Bin.

Hearing Jia Jie's opinion, Wang Bin nodded. Indeed, as Jia Jie said, Tiangong Technology seems to have a large scale now, but it has not yet involved in computers and intelligent digitalization. Naturally, the company is There is no talent pool for this either.

But Wang Bin knows that many product lines of their company will definitely need to be built by themselves in the future, and if their company wants to produce some high-end equipment in the future.

For example, ultra-high-precision CNC machine tools, ultra-high-precision lithography machines, etc., all require a large number of talents in this field, and these will involve a large number of company secrets.

So these things cannot be entrusted to other companies to help them build production lines.

"I know about this, and I will arrange for the company to start recruiting talents in this field as soon as possible, and establish a laboratory in this field!" Wang Bin nodded and said.

After Wang Bin encouraged them, he walked out of their mechanical research and development workshop, came to the parking lot, got into his car, and drove towards the innermost hill in the industrial zone.