Skynet Architect

The volcano is burning. The thick magma is flowing, there is no strong wind and waves, that is because the weight of the magma is not comparable to that of the sea water, the fiery red color is golden when it meets the magma, and there is a lava hell in the center of this hell. A huge chimney, the chimney is very strong, can withstand the high temperature of thousands of degrees, it is a spectacle in the center of the magma, but this chimney is not really a simple chimney, there is a pipe above it, the pipe connects In the other direction, the huge chimney is fixed by cables reinforced with superalloy all around.

Of course, this chimney can also be called a pipeline, and the super hydraulic pressure with a pressure of more than 500,000 tons will release the power of this pipeline to the maximum.

A pipe five or six meters thick hopes to be able to withstand the pressure of more than 500,000 tons.

But there is no one in the construction site, only the Terminator.

Hundreds of terminators are hanging in mid-air, mending leaks at any time, and adjusting the operation of the entire pipeline at any time.

Above, a huge factory has covered this place, and no one can know what's going on inside.

The dense smoke from the crater is directly absorbed by a new type of super air purification plant. After the air is quickly purified, all the minerals produced are recycled, and there are a lot of things produced in this way.

A large amount of materials are produced, and various pollutants from volcanoes are decomposed and become substances in people's lives, and gradually become chemical substances in life, playing an important role in life.

The volcanic waste is turned into treasure, and other things needed are easier to obtain.

In this huge pipeline, the latest type of boiling-resistant liquid will be added at any time to increase the pressure of the entire facility below.

The operation process of the internal device is all used in experiments according to the design of the scientists.

These devices have been tested by those scientists, from small to medium-sized tests, and have almost doubled the pressure.

Now start the official operation.

The huge machine didn't steam up smoke like a real machine in the steam age, and it seemed to have a little less flavor.

In the distance, really far away, about a few kilometers away, Si Fan and a group of scientists were manipulating the machinery in the control room.

"Mr. Si Fan, we can go nearby to watch the operation of the machine in person, so we don't have to be so conservative." A scientist next to him said.

Si Fan looked at him contemptuously, gritted his teeth and said, "Don't look down on your own life like this, this machine was designed by you, and don't think that you are an impenetrable wall, but the other side is a machine with a pressure of 500,000 tons. , if an accident happens, it will be a dangerous area within one kilometer nearby, and even if we are unlucky here, it will be affected."

He was right, this is a force of 500,000 tons, no one can ignore it.

The scientist next to him was silent, and Si Fan looked at all the data quietly.

"The temperature has risen to 1227 degrees, the instrument is operating normally, and you can start to apply pressure." On the operating table next to it, a young operator said.

Si Fan looked at the scientists around him. This project is not led by one person, and all of them start to develop slowly according to one person's wishes, and slowly develop the project according to people's wishes.

Now they are the brains and brains of all the people, everyone sends out their own ideas, and then sees if they can have a chance to form this huge super forging factory.

After they slowly contribute their own strength, the overall assembly will be simpler, and it is their final goal to make this machine work effectively and efficiently.

Successfully forging the first workpiece is their goal.

Everyone is standing here waiting for the result.

"Start to start." Si Fan ordered, and the operator began to operate. There was only one operator, and no one else helped.

When he starts up, all the equipment will run automatically.

This is a fully automatic device,

It is definitely not for people to build and operate.

However, the materials have standard shapes, and when the blanks are fed, they are all automatically clamped.

Now when Si Fan gives the order and starts the machine, all the design drawings on this side will be automatically entered, or the samples will be brought in, and all the data will be scanned and copied completely.

This mold is a very bad fluid style.

Si Fan was very shocked at the time. The entire mold was made of a special metal that is a high-heat solid and a room-temperature liquid. This metal was discovered only recently. It is a soft liquid in a low-temperature environment, but it starts to condense when the temperature reaches 100 degrees. , It becomes very hard at 300 degrees, and it will reach the alloy level after 500 degrees.

When the temperature is increased to 1200 degrees, it is already comparable to diamonds, and even stronger.

This amazing metal is so easy to use in this environment, just shape it at low temperature, fix it at high temperature, and use it afterwards.

The whole process is automatically operated by the internal machinery, which is very convenient.

Si Fan watched a large amount of magma slowly flow into the groove prepared in advance, gradually filling up the huge container.

This is the core of the whole forging, the weight of magma is not comparable to that of water, and there are volcanoes here.

When the magma was almost flush with the top, Si Fan's test data showed it.

"500,000 tons is enough," the operator said.

Si Fan gave an order: "Start."

The operator just taps the device.

I heard a sound of "Boom! @!~", the huge pressure was released instantly, and the super impact force was briefly rubbed on the high-temperature guide rail.

But the friction is not as strong as imagined. The magnetic guide rail makes the track very stable, and then the huge impact force falls along the magnetic field.

The instant acceleration is quite domineering.

"Boom!" Another sound, and Si Fan waited for the result.

Among the huge volcanoes, it seemed like an eruption, a violent eruption filled the sky with dust, and a huge earthquake seemed to come.

The ground is shaking.

The operator spent half a day looking at Si Fan.

"Boss, the process has been completed." He said, and then clicked on the next interface.

Si Fan just nodded silently, looking at the monitor, the workpiece had gradually begun to separate, and then began the next process, the workpiece was going to be heat treated.

In Si Fan's view, this workpiece is a huge propeller blade, which should be used on large ships.

He just took a closer look and waited to see the real thing. This power of creation reminded Si Fan of the legendary Hammer of the Titans

Dear, click to enter and give a good review. The higher the score, the faster the update. It is said that those who gave the new full score found a beautiful wife in the end! The new version of the mobile station upgrade address:, data and bookmarks are synchronized with the computer station, no ads Fresh reading!