Reborn Mecha Master

Chapter 242 Modular Parts (First Update)

Tian Zhi, who was on the side as a person from the maintenance department, glanced at the information given by Lin Tao and exclaimed on the spot: "Lin Tao, are you really going to use the corpses of these monsters to make mechas?"

People in the maintenance department are not involved in the design of mechas, but they have been repairing them for a long time and have dismantled many mechas. They have a certain ability to distinguish the parts of mechas. The diagrams given by Lin Tao can all be directly formed into mechas. A shell component.

"Yes, Kong Li has been living in the starry sky. The carapace on his body is extremely hard. Ordinary thermal weapons cannot directly penetrate it. Even if a metal of the same hardness collides with it, it will only temporarily cause a slight dent at most, and it is impossible to make it explode. , and after being soaked, it can withstand laser cannons below 400mm. These two points alone can give the mecha a defensive capability no less than that of a giant starship." Lin Tao said.

As the head of the Materials Department, Lu Xuewen took a breath of air when he heard this, and his eyes flashed with lightning. He had to turn his head on the spot and immediately ran to get the materials.

"Lin Tao, what about me? I can't just come here to help dispose of the corpses of these monsters, right?" Seeing that Lu Xuewen had a mission, Tian Zhi pointed at himself and asked.

Lin Tao smiled slightly. The reason he originally called Tian Zhi was just to ask him to come over and help supervise the miners making mechas. But now, he really has a new task assigned to Tian Zhi.

For mechas with neural circuits, a lot of new technologies are needed, and the pre-sale of the K223 can only delay the three giants for a while at most. It will never be delayed for a year and a half. It is impossible for Lin Tao to spend a lot of time to produce this type of mecha. body.

Therefore, Lin Tao plans to directly change the type and produce component-based mechas.

The so-called component parts are to disassemble a mecha into multiple parts and then assemble them. In this way, componentization reduces the technical difficulty. Once damaged, you only need to come back and directly replace the parts of the same component. And by replacing the energy blocks and ammunition, it can be used again just like a new mecha. This not only saves time compared with the production of the entire machine, but also increases the speed of maintenance on the battlefield.

Originally, Lin Tao had produced two adapted mecha designs, but at this time, he had no intention of taking them out, but wanted to go back and modify them.

"Department Director Tian Zhi, please wait for two days, and there will be a new task for you soon." Lin Tao said.

Tian Zhi frowned, looking confused.

"Don't worry, it's a completely new concept. Once it goes on the battlefield, the work of your maintenance personnel will be greatly improved." Lin Tao said with a smile.

"Is this really possible?" Tian Zhi was surprised and blinked as if he couldn't believe it.

"Okay, you all can help dispose of these monster corpses in the past two days." After Lin Tao finished speaking, he turned and left.

After all, a group of mecha designers looked at each other with strange expressions on their faces. Isn't the purpose of Lin Tao asking them to come over just to design a new mecha?

He just said a few useful words, asked them to help dispose of the body, and then disappeared.

Do you really think that their mecha designers are just hard laborers?

However, Lin Tao had already left, and the former heads of the Maintenance Department and Materials Department of the First Mecha Academy were working in person. What else could they say, so they could only follow Lu Xuewen obediently.

Returning to the spaceship laboratory, Lin Tao immediately took out the two mechas in the watch and redesigned them. At this time, Lin Tao already had new ideas.

Parts are modular!

This method was an idea personally proposed by Liu Xueying, the mentor of his body. Just before Liu Xueying left with Master Gu Lei, Lin Tao gave her a prototype document of similar information in the form of a paper.

In Lin Tao's view, since Liu Xueying is the initiator of this plan, with her mind, she can definitely come up with corresponding ideas in a short time. This information is simply like a guide, directly bringing her thinking back to the right path. , save a lot of time.

Lin Tao is more familiar with the modularization of parts than anyone else. After all, he has participated in the design of neural circuit bodies in later generations. Although he is not the chief designer, he has some contact with it.

The modularization of parts is the prototype of the neural circuit body. If you ignore the technical aspects, there is not much difference between the two.

What's more, Lin Tao's previously proposed improved version of the Heavenly Armor God General already had some meaning.

After taking out the two mecha design drawings again, Lin Tao moved the capacitor pen, cut the main body of the mecha apart, and then sorted out the internal circuits.

Compared with the neural circuit bodies of later generations, the structure of these pure wire lines still took Lin Tao a lot of effort. In the end, Lin Tao even used watch communication to find Peng Haokong and Tong Xuelin.

These two guys personally participated and redesigned the improved version of Tianjia Shenjiang on their own.

With the participation of these two people, a lot of Lin Tao's troubles were immediately solved.

After two days and two nights, the two machines were finally completely eliminated by Lin Tao.

Looking at the two different machine design drawings in his hands, even Tong Xuelin, the founder of the TR series of machines, was shocked: "Lin Tao, these mechas are all similar to the improved version of the Tianjia God General. Are you really Aren’t you afraid that this machine has design flaws?”

Lin Tao was amused in his heart. He folded his hands on his chest and asked with a half-smile: "Oh? What kind of flaw makes our Tongda designer so worried?"

brush! Tong Xuelin's face suddenly turned red.

If Lin Tao were not present, then it would be understandable for him to praise this great designer. After all, he was also one of the designers who personally designed the improved version of the Heavenly Armor God General, and many major design plans were personally designed by him.

However, all of this was under Lin Tao's guidance. Without Lin Tao's guidance, let alone design, there would be no concept.

In front of Lin Tao, he really didn't dare to take the title of great designer.

Peng Haokong on the side couldn't help but cover his mouth and laughed.

"This... this..." Tong Xuelin hesitated for a while, then gritted his teeth: "Lin Tao, if this kind of machine that is purely assembled, if it collides with a fully designed machine body, will it explode on the spot? Turned into parts?"

As he spoke, he made an exaggerated gesture with both hands.

"Huh?" Hearing this, Peng Haokong couldn't laugh anymore, and he also formally examined this issue.

Lin Tao laughed. Regarding the improved version of the Heavenly Armor God General, due to time constraints and the fact that it was designed by the two people in front of him, everything was kept simple.

But that's different now.

The time before the attack of the three giants is still relatively loose, so Lin Tao has no intention of using the same combination of parts as the improved version of the Tianjia Shenjiang.

What's more, the new body he is designing now is not a TR variant, so there is no need to worry about differentiation and combination.

Lin Tao pointed to an articulator-like mechanism on the design drawing: "Look here, how is it different from the improved version of the Tianjia Shenjiang?"

Peng Haokong and Tong Xuelin immediately put their heads together.

Since wires are also used between parts, the articulator not only has the articulation between the parts, but also has a connector specifically used for the wiring, which can also connect the wiring between two parts.

The connector of this line was designed by Peng Haokong himself, but after listening to Tong Xuelin's words, he couldn't remember the connection between the two parts for a while.

When he saw it, he burst into laughter: "Old boy, your worries are unnecessary. Look at these bite parts, they are like two parts snapping together. How can they easily break away after being hit?"

Tong Xuelin was embarrassed.

Perhaps the long hours of work and past experience had restrained his thinking, so at the moment his thoughts were still at the beginning of the design of the improved version of the Tianjia God General. Once Lin Tao pointed it out, Tong Xuelin immediately understood.

"Now, we only need to separate the various components and let the miners produce them separately. We will use our own people for assembly. In this way, even if we disband these miners, the outside world will not be able to obtain it from their mouths. Our technology." Lin Tao explained.

These parts seem to have been completed a lot, but there is still a certain gap between the final assembly. Even if others get these mecha components, they may not be able to assemble the same model.

This is another advantage of modular parts.

The bite parts need to be connected through certain techniques and cannot be snapped in directly. This is also a secret among various mecha companies after the advent of modular parts in later generations.

The method Lin Tao adopted at this time was also the special bite piece technique of the Sixiang Mecha Company that survived from later generations.

It is a pity that the mecha at this time still uses wire lines, otherwise this part can also be used to prevent disassembly, making the modularization of parts more personalized.

When later generations promoted the modularization of parts, due to the war years, they began to become more and more strict in this regard. In the end, unified models were integrated, which finally solved this problem.

Of course, at that time, it was already the end of the war with the eight giants.

When modularization of parts first appeared, each mecha company had a sense of urgency and deliberately designed assembly modules and line continuity methods that were different from each mecha company.

In this way, it was not until the Interstellar Federation officially announced the unification that the major mecha companies turned to make detailed changes between parts, forming a way of distinguishing between the major mecha companies.

However, this is all a matter for future generations.

Suddenly, Lin Tao stretched out his hand and touched his nose: "Tong Xuelin, if our Mingyuan Star is recognized by the Interstellar Federation in the future, please remember to have this kind of fasteners and line connectors registered with the Interstellar Federation."

In later generations, due to wars, these components were unified into a unified model at the request of the Interstellar Federation, but it is different now. This is a technology developed by Lin Tao.

Once it is registered with the Interstellar Federation and a unified model is formed, no matter which mecha company produces the same type of mecha in the future, they will need to pay a certain registration fee to Sixiang Mecha Company in these two aspects.

This is something that can be done by sitting and counting money until dawn.

When Tong Xuelin and Peng Haokong heard this, their eyes suddenly shone with light.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like