Lord of War

In the grinding tool of the long sword, there is a hiltless sword body lying quietly. The sword body has a very light green film like gum, which perfectly wraps the whole sword body inside, exuding a Layers of light blue brilliance, with faintly shining stars.

Sean, has removed the hilt and blade of Charles's sabre, leaving only the body of the sword.

I saw that he carefully cut a hole in this layer of film, and then the rock medicine in his hand was slowly poured into the hole. Suddenly, the light green film seemed to be stimulated by something. There were countless bumps on the thin film on the blade, as if the entire thin film was about to burst in the next second. If ordinary people saw this situation, they would definitely stop pouring the liquid into the film, but Sean did not stop, but began to accelerate the pouring of the liquid.

At this moment, in Sean's line of sight, he can clearly see that there is a spectrogram on the sword body, the leftmost is green, the rightmost is yellow, and there is a red line on this spectrogram. The pointer is resting in the white position in the middle - if you compare this spectrogram to a ruler ten centimeters long, the leftmost two centimeters are green, the right two centimeters are yellow, and only the middle is not. To five decimeters is white, the rest are black.

If this kind of strengthening magic can keep the pointer in the white area in the middle, then the strengthening effect can be successfully maintained, and if the pointer runs to the far left or the far right, it means that the composite failure can only retain one of the effects. , of course, if you let the pointer run to the black area, then it will naturally fail.

So even if the thin film on the sword body fluctuates strangely now, as long as the pointer doesn't deviate, Sean doesn't need to pay attention at all.

His hand was very stable, without a trace of tremor, and the light yellow liquid poured from the medicine bottle was even more surprising - it was a long light yellow thread like a silk thread, and all the liquid went along The opening flowed into the film, and there was not a single splash, nor did the thread thicken and thin due to the gradual reduction of the liquid in the bottle.

Sean has been keeping an eye on the changes in the spectrogram. Although he hasn't made equipment for a long time, these basic contents seem to have become a kind of instinct of his body. He doesn't need too much thinking at all, just a little bit. After a while, I remembered everything clearly.

Soon, all the liquid in the bottle was poured out, and there was not even a little bit left.

Sean glanced at the spectrogram, still in the white range. Rubbing his sore right shoulder, he couldn't help laughing: the first time I tried the compound enhancement of the six attributes was much more difficult than it is now, but I've never been so nervous, but now I'm too nervous.

Shaking his head to get rid of the tiredness in his mind, Sean didn't need to look in the mirror to find that his face must be very pale. There is no difference between using life skills and using combat skills. Of course, as a blacksmith, all you need to consume is energy and physical strength. If energy or physical strength is insufficient, then all life skills will be unavailable. In other words, look at Without the spectral map, it will even have a certain degree of impact on other aspects.

Sean glanced sideways at the furnace, and the flames in the iron barrel had become very small. He operated the mechanical arm to take the iron barrel and looked at it, and found that the ore raw materials inside had indeed melted into molten iron, but the accelerant's The effect is still in play. This is not a problem. He took out another bottle of alchemy potion. The liquid inside was dark blue, and when the cork was opened, a light mist came out.

Extinguishing agent.

A very strange alchemy potion, its only function is to make the effect of the accelerant disappear, in addition to that, it cannot even extinguish ordinary flames.

After this step,

It is to be purified, and the blacksmith shop also has corresponding purification tools, which is a very labor-intensive and time-consuming job. Of course Sean wouldn't do such a thing at this time. He took out another potion that had been prepared a long time ago and poured it into a slightly smaller iron bucket. There is a layer of clear and transparent liquid.

Purification potion, an alchemy potion most commonly used by blacksmiths, is slightly expensive. Generally speaking, you will not use such extravagant things to make ordinary equipment. Only when making magical equipment, will you use this expensive potion in a hurry. If it is not in a hurry, Sean will not be willing to use purification. Potion, this is an expensive potion for a gold coin!

When the flame of the accelerant in the iron bucket was completely extinguished, Sean poured all the molten iron into the smaller iron bucket containing a layer of purification agent. Once the bright yellow molten iron entered the iron bucket, The color became lighter in an instant, but it seemed to have a more solid vision, and the potion of the purified potion was only a thin layer, but now it has grown a few centimeters in height, and there are many The finely divided black particles are even more mixed in color.

Sean reached out and grabbed it, took out the mottled liquid mass, and threw it directly into the furnace to burn it. He didn't expect to leave any evidence here. After that, he reached out his hand again to smooth out the crack on the sword body. The sword body was no longer visible in the light green film, and some were just pale yellow. Through the operation of the mechanical arm, Sean repeated the action of pouring the rock potion before, still very carefully and carefully pouring all the purified molten iron into the mold with the blade body, so that the molten iron and film completely combined.

And this time, the spectrogram displayed in Sean's field of vision is no longer green and yellow. It is also shaped like a long ruler, but the end is blue, and the top is red. As for the original white position in the middle But it turned green, and there was no fourth color. At this time, the pointer on the spectrogram is floating in the red area, and it is infinitely close to the top position. Whenever the pointer is about to reach the red top position, Sean will stop the action in his hand and wait until the pointer drops slightly. When it comes down, it will continue to pour molten iron into the mold.

In this spectrum, red represents high temperature, blue represents low temperature, and green represents perfection. When the molten iron is poured, a countdown will appear. If you are making a casting weapon, you can omit this step and don't need to pay attention to it, but magic equipment will not work. You must let the pointer drop to the green area before the countdown ends. Otherwise, If so, there will be two situations in the final result of the forged magic weapon.

If the final pointer stays in the red area, it will hurt the performance of the weapon. In the original game, some players forged powerful silver that is worse than the properties of medium-effect bronze; but if the temperature is too high, the pointer will stay at the end. In the blue area, the durability and quality of the weapon will be greatly reduced, making the weapon itself relatively brittle, and it is even very likely that some weapons with better quality will be cut by the opponent.

Although these failed experiences are the results of the game, Sean didn't want to try it out in the real world.

He just glanced at the countdown, then took out the cooling spray that had been prepared, and started spraying it on the molten iron in the mold. This spray is also very skillful, because with the passage of time, the pointer on the spectrogram will gradually decrease. If the cooling spray is used early, then when the countdown is over, the pointer will definitely drop to blue Near the area, this will also affect the equipment.

This step is one of the two dangers that magic equipment needs to face. The more advanced the magic equipment is, the smaller the green area will be. The green area of ​​the special effect gold-level magic equipment is less than one millimeter. The small line, that requires extremely accurate judgment and mastery to achieve perfection. There were so many gold-level magic equipment with special effects that Sean forged in the game, but only one of them reached the perfect standard.

Of course, it is still difficult for Sean to do this step. He can easily judge the downward rhythm of the pointer, and finally let the cooling stay in the green area.

For many people, the two most dangerous stages are nothing to Sean, at least before the gold level, they can't make Sean frown.

He turned the sharpener over, poured out the long sword inside, then clamped it with pliers, picked up a medium-sized hammer, and slammed it down on the sword.

"Ding"

The hammer landed on the upper end of the sword body, and a light green halo with a light yellow glow bloomed from the place where the hammer fell, and the rich wind and earth element breaths instantly permeated the air, and The places hit by the hammer were obviously flattened a little.

After that, a series of ding ding sounds sounded. Sean took this medium-sized hammer and knocked the entire body of the sword, no more, no less, exactly eighteen strokes, which happened to be the eighteen green marks marked by the spectral map. light spot. Basically, every time Sean taps, a corresponding green light spot will disappear, and then it will turn red. There are no other colors.

Basically, after this step, the strengthening of the Charles Saber is complete. Sean clamped the blade with pliers and placed it in the sink. A white mist erupted suddenly, and the elemental aura that had permeated the air was also lost. As if attracted by something, he frantically poured into the sword body, but within a few seconds, the elemental aura that was still in the room disappeared without a trace.

Because of the use of purified potions, this sword no longer needs to be beaten and quenched repeatedly to remove impurities, which can be regarded as a one-time molding. After completing this step, Sean re-inserted the blade and hilt of the sword back, and the long sword once again emitted a blue brilliance, but it was obviously more dazzling than before, and even the brilliance still carried A bit of green and yellow.

[Charles's saber (unopened), weak magic (bronze), hardness? ? ? , sharp? ? ? ,puncture? ? ? , ? ? ? . 】

[Item description: This is the sword given to General Charles by King Elder III of the Serian Kingdom on the eve of the North Cold Battle. This sword followed General Charles throughout his life, and was once regarded as a symbol of honor for General Charles' family. However, because of the infighting in the family of General Charles over inheritance rights, the sword was lost from then on. Now, although you are lucky enough to get this sword, the magic power on it has been lost too much, and it has long lost its prestige. 】

"Next, as long as you polish the front, the data will be displayed." Sean held the saber in his hand, and felt that the weight seemed to have increased a little, and his eyes suddenly became a little more expectant, because this was The forging he tried for the first time after he came to this world seems to have a good effect so far.

While thinking so, Sean walked towards the only grinding machine in the smelting room. He couldn't wait to see what the properties of this weapon were like.

========Dividing Line========

Originally, this chapter should have been posted before eleven o'clock, but I had to deal with it temporarily. It was already past one o'clock when I got it done, I'm really sorry. ...This chapter is the first six plus chapters promised before! Then, be cheeky for clicks, recommendations, and rewards! ! Beg for support! !