Fake Extinction of All Mankind, and I Rebuild Civilization with my Bare Hands was Broadcast Live

【Huh? What is this?】

【Looks like a box?】

[Although I can't tell what it is for the time being, I have to say that Master Kui's craftsmanship is really invincible! 】

【Full mortise and tenon structure! Disadvantages!】

【Really strong!】

【Isn’t Kui Ye building a wooden tub bathtub?】

tub?

Don't say it.

It really makes sense!

See this wooden box.

The audience didn't think about anything else for the first time.

I just thought it should be a wooden container.

Much like the wooden barrels used for bathing in ancient times!

But it's unclear what it is.

here.

inside the camp.

The warehouse is ready.

Jiang Kui put it aside first.

Pick up the chassis of the wooden cow and the horse again.

Set aside on a log workbench!

Then remove the ink fountain.

in the very middle of the chassis.

Release the ink line to fix.

Approximate location of the ejection bearing.

Bearings cannot move forward.

Can't stand behind!

Must be completely in the middle of the chassis!

otherwise.

during operation.

The balance of the entire wooden cow and horse will be greatly affected!

Second.

The weight of the "tau" and the braking system at the chassis.

Bearings are also required!

The wooden bull and the horse are located at the bull's head in the warehouse.

It's not just designed for aesthetics.

But there are brake considerations.

Because the "bull head" increases the weight of the front of the car!

As such.

when going downhill.

Match with the two support sticks in front of the chassis.

It can play a non-slip effect!

Avoid surprises.

If the bearing is too forward.

Or too far behind.

The weight of the bull's head.

will be affected accordingly!

This greatly affects the anti-skid ability of the body.

About the bearings of the wooden cow and the horse.

previous life.

There are many versions circulating.

Many people think so.

The secret that can keep the flow of horses still is in the bearings.

But in fact.

This mechanism is not on the bearing.

but on the chassis!

The principle is similar to today's car brakes.

Wooden sticks on the chassis.

Connected to a set of full mortise and tenon structure brake bearing system.

Just kick the stick with your foot.

The wooden trap will brake immediately!

This clamps the hub of the wheel!

If you want to unlock.

Just pull out the sunk rollers at the rear of the bin.

Then put away the stick on the chassis

The braking system will fail.

Get the wheels rolling again!

Two processes.

Indispensable.

It sounds mysterious.

But the principle.

In fact, it is similar to the principle of bicycle brakes!

If you don't understand the operation process.

No matter how you do it.

Couldn't unlock the mechanism.

Only the first moving roller.

Just kick the stick again.

previous life.

this problem.

It has stumped many fans and researchers of wooden cows and horses.

Because of the lack of historical data.

The bamboo slips unearthed were badly damaged.

The world has not been able to spy on the mystery of the wooden cow and the horse until now!

It can only be reproduced based on the only information available.

The wooden cows and horses described in "Three Kingdoms" have always been a mystery.

Makes countless people crazy.

Because it's so amazing...

The production conditions at that time were far from modern.

The structure of "Wooden Cow Flow" and "Horse" also seems to be simple and easy to implement.

It really fits the background of the times!

but.

The book describes the description of "Wooden Cow and Flowing Horse".

In fact, it violates many laws of physics.

In present words, Newton's coffin board couldn't hold it!

If the "Wooden Cow and Flowing Horse" are really as described in the book, they can not eat or drink.

You can walk without external force.

Obviously it does not conform to the law of conservation of energy.

Because of walking.

energy must be consumed.

At that time, there must be no energy materials such as oil and natural gas.

It doesn't eat or drink.

get energy from there?

so.

In the end.

Mu Niu Liu Ma is just an improvement on the wheelbarrow.

Not deified.

It's just one with a clever braking mechanism.

A means of transportation that makes transportation easier and less labor-intensive.

but.

even so.

If it can be here, it can perfectly reproduce the wooden cow and the horse.

Enough to shock the world!

Because compared to the previous life, the people here have a shallower understanding of wooden cows and horses!

Everyone knows this stuff.

But no one can reproduce it!

soon.

The position of the bearing is set.

Jiang Kui got up and found a stick of the right size and length.

The stick is straight enough.

The thickness is just right!

But to act as a bearing.

Still need to be improved.

It cannot be used directly!

Bearings aren't the source of braking though.

But the braking device must pass here before it can act on the hub!

Therefore, the channel of the braking system and the straight tenon connected to the chassis need to be reserved on the bearing!

Jiang Kui did a rough calculation!

Still quite complicated.

Do it all the way.

lots of details.

It will take a lot of work!

Don't just make eight straight tenons on the bearings that connect to the chassis.

Three more grooves to make!

besides.

both ends of the bearing.

Because of the connection to the wheel hub.

should also be dealt with accordingly.

Carved grooves.

Easy to insert and secure the wheel!

Be the same size!

Thick and thin!

The requirements for technology and craftsmanship are still quite high.

Have a plan in mind.

Jiang Kui moved immediately.

Sit on the ground.

holding wooden stick.

First scrape off the bark with a knife.

make it brighter.

then.

Then use shark teeth to saw on the stick.

Saw out three grooves for the brake rod to pass through.

Then.

on top again.

Eight wooden holes were punched symmetrically.

Eight sharpened tenons were inserted.

The eight tenons on the bearing should match the sockets dug out on the chassis later!

Not a single cent!

The connection between each tenon and each socket must be tightly seamed.

The location can't be wrong!

Only in this way.

When the straight tenon on the bearing is inserted into the mortise.

Only the whole bearing can be closely connected with the chassis! (Zhao Liao Zhao)

Follow the above principles.

After making the tenon.

Jiang Kui brought the chisel again.

First determine the position of the lower chassis socket!

This is the point.

Then he carefully chiseled out the eyes.

A little bit first.

And then gradually expand!

soon.

Such and such.

It didn't take long for the eight sockets on the chassis to match the bearings.

Finally finished.

Done with this.

Jiang Kui stood up.

Buckle the warehouse upside down on the ground, and then put the chassis on it.

Pick up the bearing.

Aim for the eyes!

One by one.

Keep hammering the tenon into the mortise with the axe!

soon.

A single bearing is firmly integrated with the chassis as desired!

throughout the process.

The audience in the live broadcast room.

Almost everyone saw this scene with their own eyes!

All are deeply shocked by this exquisite wooden structure!

…fertile…

(Five more, ask for votes).