Chaoshen Technology Trading Mall

"Yeah!!! It worked, we made it!!!"

"Great! Unexpectedly, we actually developed a small special copper alloy production line, which is really great!"

When Wang Bin announced the structure of this trial production, Yu Pingping and the others immediately cheered loudly.

And Wang Bin did not stop them. Although this production line is only a small production line, as a special copper alloy production line, the technical content of the entire production line is actually not low. In the case of using modern electronic equipment, the technical difficulty is even higher, so it is definitely not easy for Yu Ping and others to develop this production line.

After a while, after Yu Pingping and the others calmed down, Wang Bin said to Pingping and the others again: "Yu Pingping, now that our production line has been successfully tested, the next step is to install this production line in the workshop. In addition, since this production line is only a small production line, and it is also a production line with a very low degree of automation, your next task is still very heavy.

First of all, in the subsequent production process of this production line, especially in the initial stage, you must send people to guide workers to operate this production line, and be responsible for improving some defects of the production line to make this production line more perfect.

At the same time, you will need to design more advanced production lines in the future, such as the degree of automation of the production line, increasing the output of the production line, and so on. "

After hearing Wang Bin's words, Yu Pingping and the others nodded, among them Yu Pingping said: "Good Mr. Wang! We have a specific plan. This afternoon, we will move this production line to the No. 5 workshop. Although the No. 5 factory building is not very big, it is not a problem to put a few small production lines.

At the same time, we have also set up a special team for the follow-up improvement and maintenance of the production line. Although we only design and manufacture such a production line now, as we design and produce more and more products and production lines in the future, then There must be a dedicated person in charge.

The last is the design of the new production line. We have a complete plan in this regard. Next, we plan to design a fully automatic production line with a daily production capacity of about 200 tons. If successful, we will then proceed with medium and large production lines the design of. "

"Yes! But in terms of medium and large production lines, you don't have to rush, take your time step by step!" Wang Bin nodded with a smile.

In the afternoon, Wang Bin moved the production line to No. 5 workshop together with Yu Ping and others, and the installation was completed. At the same time, the production line started formal production in the morning of the next day.

Of course, because of the copper-based superconducting materials produced on this production line, Wang Bin has not yet announced it, and naturally there are no customers. Wang Bin is not in a hurry to announce this, after all, the production capacity of this production line is only 80. In addition to the use of room temperature superconducting materials and the performance of this copper-based room temperature superconducting material, Wang Bin is not afraid that there will be no customers in the future.

Therefore, Wang Bin is going to store the copper-based superconducting materials produced first. After all, once Wang Bin builds the production line of superconducting batteries, only the superconducting materials needed for superconducting batteries will be very expensive. huge.

When Wang Bin saw that the installation and production of the production line designed by Yu Pingping and others was very smooth, even if there were some minor problems, they were quickly resolved by the professional team established by Yu Pingping and the others.

Wang Bin was also relieved of Yu Pingping's mechanical R\u0026D and design team, and turned back to his own laboratory to continue the trial production of the second-generation superconducting battery technology.

Although it is said that Wang Bin has been trial-producing the second-generation superconducting battery since the end of the year until now, but until now, he has not succeeded once, but it is not that nothing has been gained. So far, Wang Bin Has successfully overcome many problems, is very close to success.

Wang Bin believes that within a few days, he will definitely be able to successfully manufacture the second-generation copper-based superconducting battery.

Sure enough, just a week after Yu Ping and others successfully developed the production line, Wang Bin also successfully manufactured the first second-generation copper-based superconducting battery, and its performance has reached the standard required by the technical data in his mind.

As for the follow-up third-generation copper-based superconducting battery technology, Wang Bin does not plan to conduct trial production for the time being. After all, Wang Bin has spent nearly a month and a half on the second-generation superconducting battery technology. In terms of conductive battery technology, Wang Bin believes that even if he has a complete superconductive battery technology in his mind, it will not be able to be trial-produced in a short time.

What's more, even the first-generation and second-generation copper-based superconducting batteries have not yet been mass-produced, so there is no need to rush to trial-produce the third-generation technology.

The most important thing is that, given the current situation of Tiangong Technology, even the first and second generation superconducting batteries are enough for Tiangong Technology.

Of course, the manufacture of the first second-generation superconducting battery does not mean that it can be mass-produced. After all, this is just a trial production in the laboratory. If you want to mass-produce, you must have a corresponding production line. He also has the technology of the production line in his mind, and at the same time, it is not too difficult in terms of technology.

The most important thing is that in terms of the production line, Wang Bin doesn't need to work alone in the laboratory behind closed doors. He can let Yu Ping and others come together for R\u0026D and production. After all, Tiangong Technology already has a mechanical R\u0026D team.

And the production line technology is not afraid of being known, because even if other people get the production line, so what? Without copper-based room temperature superconducting materials, it is impossible to produce any volume superconducting batteries!

So after Wang Bin completed the trial production of the second-generation superconducting battery technology, he walked out of his laboratory and returned to his office, preparing to go to Yu Pingping's mechanical R\u0026D workshop tomorrow to develop the production line.

However, before Wang Bin returned to his office, the mobile phone in Wang Bin's pocket rang.

Wang Bin took a look at the mobile phone in his hand, and found that it was the call from the R\u0026D laboratory, which was made by Professor Pok.

So Wang Bin couldn't wait to pick it up immediately, and at the same time his heart was faintly excited. He knew that under normal circumstances, the Aeronautical Development Laboratory over there would not call him unless there was something wrong. They would only call Wang Bin for important happy events or problems.

At the same time, he had learned from Professor Zha a few days ago that all the accessories of that aircraft engine had been manufactured, and Professor Zhao and the others were inspecting these parts one by one. Assembling, so after receiving the call from Professor Zha, Wang Bin began to look forward to it. It is very likely that the aero-engine has been successfully manufactured with the efforts of Professor Zha and others!

Please remember the first domain name of this book: . The fastest website for mobile version updates: